Radio stations designed for installation in wheeled and tracked, combat and non-combat vehicles with RF power 25W (50W).
The basic variant of the radio station RF-1325/RF-1350 consists of a radio station RF-13 and a RF amplifier ZV-13 (ZM- 13) and a sprung (unsprung) frame.
The radio station can be expanded with an RF filter AF-13 enabling the operation of several mobile sets on one vehicle at the same time.
Another extension can be the HZ-13A intercom and the HZ-13B driver box. this extension allows you to control the radio from three places - from the operator RF-1325/RF-1350, from the telephone line to a distance of up to 2.5 km and from the driver's seat. At the same time, communication between operators is possible without transmission to the radio channel.
The set can be expanded with a radio data modem MD-13.1 enabling full-duplex data transmission.
Technical characteristics (basic version RF-1325/RF-1350)
Frequency band: 30,000 MHz - 87.97 MHz
Channel spacing: 25 kHz
Number of channels: 2320
Channel selection: digital, from the radio or handset keypad
Type of operation: simplex or half-duplex call, or data transmission at speeds of 300 - 2400 bit/s and 16 kbit/s
Modulation: frequency, max. Stroke 5.6 kHz
Transmitter power: 5 W (reduced 0.2 W, increased 25 W (50 W))
Receiver sensitivity: better than 0.5 microV at 12 dB SINAD
Low frequency power: 1 W/6ohm
Supply voltage: RF-1325 - 12V, or 27V, RF-1350 - 27V
Supply voltage limits: RF-1325 - min. 10V - max 33V, RF-1350 - min. 18V - max 33V
Continuous talk time at 50 ° C: RF-1325 min. 2 h, RF1350 min. 30 min
Operating temperatures: -30 ° C - + 60 ° C
Weight: max. 15 kg
Source: author's archive, http://www.dicom.cz
Note: Resources are shared for other posts in this topic, unless otherwise noted.