Compressor DK 661 is intended for powering sets of pneumatic equipment. The compressor is equipped with a control device that regulates the operation of the machine according to the compressed air supply and a device for automatically stopping the machine if a lubrication failure occurs or if the compressed air temperature exceeds the permissible limit.
The outboard compressor is mounted on a single-axle trailer towed behind a truck.
Main data:
Dimensions:
Length: 4450 mm/with drawbar /
Width: 1950 mm
Height: 1820 mm
Weight: 2720 kg/without fuel /
Tires: 6.50-20
Engine: T-928-63 - diesel 8-cylinder, four-stroke with direct fuel injection, air-cooled
Cylinder capacity: 11762 cm3
Power: 88 kW at 1500 rpm./min.
Fuel tank capacity: 100 l
Lubricating oil filling: 22 l
Own compressor: piston, single-acting two-stage 6-cylinder to W.
Supply air volume: 660 m3/hour.
Operating overpressure: 0.7 MPa
Speed: 1500 rpm./min.
Cooling: by air
Lubrication: pressure circulating
Oil filling: 12 l
Operation: 1 engineer
Source: Technical preparation of engineering units SVŠT 1988
The outboard compressor is mounted on a single-axle trailer towed behind a truck.
Main data:
Dimensions:
Length: 4450 mm/with drawbar /
Width: 1950 mm
Height: 1820 mm
Weight: 2720 kg/without fuel /
Tires: 6.50-20
Engine: T-928-63 - diesel 8-cylinder, four-stroke with direct fuel injection, air-cooled
Cylinder capacity: 11762 cm3
Power: 88 kW at 1500 rpm./min.
Fuel tank capacity: 100 l
Lubricating oil filling: 22 l
Own compressor: piston, single-acting two-stage 6-cylinder to W.
Supply air volume: 660 m3/hour.
Operating overpressure: 0.7 MPa
Speed: 1500 rpm./min.
Cooling: by air
Lubrication: pressure circulating
Oil filling: 12 l
Operation: 1 engineer
Source: Technical preparation of engineering units SVŠT 1988