This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Diorama 1:35,Tamiya...
URL : https://www.valka.cz/D-Day-X-t32632#117859
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
No tak tohle je super celkove 8.) tady uz nic nechybi proste nadhera!!! akorat ty fotky jsou trochu tmave nebo to je schvalne - jako vecer???
URL : https://www.valka.cz/D-Day-X-t32632#117865
Version : 0
Reklama
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Bohužel foceno na kinofilm a skenováno,nemám digitál. Špatně jsem to nasvítil.
Ale atmosféru to má.
URL : https://www.valka.cz/D-Day-X-t32632#117870
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
hm, udelat boj v zastavene oblasti neni jednoduche. Kde je vsechen ten binec z takhle rozbitych domu (viz obrazek)? Ty tvoje jsou rozbite jeste vic.
Villers-Bocage uz po boji
URL : https://www.valka.cz/D-Day-X-t32632#117873
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
OK,máš pravdu suti je tam málo.Až to budu stavět příště...
URL : https://www.valka.cz/D-Day-X-t32632#117875
Version : 0
Reklama
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
to je fakt nádhera,moc pěkné 8.)
URL : https://www.valka.cz/D-Day-X-t32632#117888
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
moc pěkné,líbí se mi tigery a ten tvůj je par ekscelans.opravdu super.
URL : https://www.valka.cz/D-Day-X-t32632#117897
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
jak sou tam na zemi takový ty pytle tak z čeho si to dělal?teda jestly to sou pytle.
URL : https://www.valka.cz/D-Day-X-t32632#117900
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Tady mas neco pro inspiraci suti!!! 8.)
URL : https://www.valka.cz/D-Day-X-t32632#117902
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
A jeste neco lepsiho!!! 8.)
URL : https://www.valka.cz/D-Day-X-t32632#117903
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
To RADEK : ty pytle koupis normalne od Tamiy nejakej doplnkovej set asi za 100,-
URL : https://www.valka.cz/D-Day-X-t32632#117904
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Na kupovaný pytle bych moc nevsázel,já je osobně raději vyrábím z samotvrdnoucí hlíny,ta je běžně dostupná /a to i cenově / v každém větším papírnictví. Výhody například při sázení pytlů na techniku ,z kupovanými to není ono. A abys zamezil praskání hliny při schnutí /cca 24h/ je dobré potírat je Herkulesem a zároveň je sním i spojuješ.
URL : https://www.valka.cz/D-Day-X-t32632#118003
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Hm to je dobrej napad ale jak udelas ty konce tech pytlů - myslim to jak je to tam zavazany nebo tak neco - to se z toho da taky vymodelovat??
URL : https://www.valka.cz/D-Day-X-t32632#118017
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Se zavázanýma koncema pytlů si moc starostí nedělám. Za prvý se pytle většinou skládaly tak ,že stejně zavázané konce nebylo vidět a za druhé když cpeš do diorámi nějakejch sto pytlů tak těch deset na kterejch by ty konce byli vidět si nikdo nevšimne.Jinak je samozřejmě vyrobíš třeba pomocí skalpelu ,stačí to jen zkusit,ta hlína se při tvarování chová jako modurit nebo plastelína,ale múj názor je ,že vtomto případě je efekt menší než vynaložená práce. Až budu mít víc času dám na web jedno svoje starší dioráma s pytlovým bunkrem a budeš moc posoudit . Buď se ti to bude líbit nebo ne.
URL : https://www.valka.cz/D-Day-X-t32632#118122
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
OK dobre tak uvidime
URL : https://www.valka.cz/D-Day-X-t32632#118124
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Mohl by si sem hodit ukázku těch pytlů prosím ?
URL : https://www.valka.cz/D-Day-X-t32632#154693
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
To Radek: Nemáš ještě více obrázků té diorámy jak tam Téčko přejíždí přes němčoura ?
URL : https://www.valka.cz/D-Day-X-t32632#154696
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
TO Zdeněk Petrovič: co je to přesně za hlínu. Kdo ji vyrábí nebo kolik asi stojí.
URL : https://www.valka.cz/D-Day-X-t32632#154731
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Citace - honzahovezak :
TO Zdeněk Petrovič: co je to přesně za hlínu. Kdo ji vyrábí nebo kolik asi stojí.
"Pasta de modelar" český název na obalu chybí je toho 0,5kg vyrábějí to asi italové a dá se sehnat v každém větším papírnictví,nebo uměleckých potřebách.Balík stojí cca 100kč a dá se stoho nasekat poměrně velké množství pytlů.Ptej se po samotvrdnoucí modelářské hlíně.
URL : https://www.valka.cz/D-Day-X-t32632#154932
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
Citace - ARG :
Mohl by si sem hodit ukázku těch pytlů prosím ?
Promiň,já sem línej tady vypisovat odkazy na svoje modely,ale projdi si "Chlubítko"
URL : https://www.valka.cz/D-Day-X-t32632#154934
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
To Radek: Tak jsem si už našel čas a podival se na to www.missing-lynx.com a našel si to tam
URL : https://www.valka.cz/D-Day-X-t32632#154944
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
No teda ty ses vytáhl škoda že fotky nejsou světlejší (důvody jsou mi jasné)
URL : https://www.valka.cz/D-Day-X-t32632#155968
Version : 0
This post has not been translated to English yet. Please use the TRANSLATE button above to see machine translation of this post.
To Zdeněk Petrovič: Tak něják jsem se porozhlédl a našel jsem to
URL : https://www.valka.cz/D-Day-X-t32632#156180
Version : 0
Join us
We believe that there are people with different interests and experiences who could contribute their knowledge and ideas. If you love military history and have experience in historical research, writing articles, editing text, moderating, creating images, graphics or videos, or simply have a desire to contribute to our unique system, you can join us and help us create content that will be interesting and beneficial to other readers.